Zinc Phosphate CFMS
logobluesmal
+7 (4852) 98-58-95
+7 (4852) 98-18-95

Zinc Phosphate CFMS

2 258x300
 
2 258x300
 

Description:

The CFMS brand product is a tetrahydrate of zinc phosphate designed for manufacture of the anti-corrosive paints, used in demanding environment. It features a high impedance to current corrosion – of anionic as well as cationic character. The molybdate ion content in the product is over 1%.

The zinc phosphate of the CFMS brand has established itself as a reliable anti-corrosion product. High zinc content allows you to add a smaller amount of pigment to obtain excellent anticorrosive properties of your products. The tone luminosity of 99% confirms the purity of our product and enables one to use the antirust pigment of the CFMS brand in more complex and responsible formulations of your production.

Properties:

- Non-toxic, environmentally friendly product

- Being free of unwanted colour, the product can be used in primers and ground coats of any colour

- When introduced into a painting system, the product does not cause side effects

- When the coating composition with zinc phosphate is applied on the metal surface, a protective layer is created on the surface of the substrate, which interacting with oxygen creates phosphate complexes, protecting the metal from rusting
- Unlike organic corrosion inhibitors, the film-based coating demonstrates a lasting anti-corrosion effect
 

Application:

It is suitable for paints, resins, epoxy resins, polyurethanes, amino acids, acrylates, rubber. Due to low refractive power it can be used for finishing paints and primers. Easy colour bendability. Good corrosion resistance.

We can always offer you the required amount of zinc phosphate CF, large volumes of the product are supplied at a discounts.

 
TECHNICAL DATA
 Appearance White powder
1.  Loss on ignition 600°C (%) 6-14

2.  Zn content (%)

     ZnO content (%)

40-48

49-60

3.  PO4 content (%)

     P2O5 content (%)

40

30

4.  MoO content (%), %, не менее 1
5.  Mass fraction of substances soluble in water %, max 0,3
6.  Sieve residue - 45 μm (%), max 0,3
7.  рН water suspension 5,5-8,0

8.  Oil absorption (cm3 /100g), max

30
9.  Dispersibility mkm, max 20
10.  Tone light , %, min 98
  
Остерегайтесь китайских подделок!


Обратная связь